Need help?Do you have a question about the JBL L110 and is the answer not in the manual?
General| Frequency Response | 35 Hz - 20 kHz |
|---|---|
| Impedance | 8 ohms |
| Type | 3-way |
| Woofer | 10-inch |
| Midrange | 5-inch |
| Tweeter | 1-inch |
| Sensitivity | 89dB (1W/1m) |
| Recommended Amplifier Power | 10-200 Watts |
| Dimensions | 610mm x 362mm x 333mm (24in x 14.25in x 13.125in) |
Recommended wire sizes for loudspeaker connections based on distance.
Procedure for connecting wires to the loudspeaker terminals.
Procedure for connecting wires to the amplifier/receiver terminals.
Procedure to remove and replace the speaker grille.
Steps to remove the low frequency driver from the enclosure.
Steps to remove the midrange transducer from the enclosure.
Steps to remove the high frequency dome radiator.
Procedure for removing the frequency dividing network.
Guidelines for reconnecting wires with correct polarity.
Instructions for reassembling components and ensuring seals.
To Next Page
