JBL L220 User Manual

Overview of the JBL L220's accurate, studio quality reproduction and advanced engineering.

Details on connecting speaker systems to amplifiers using appropriate wire gauge and terminal connections.

Advice on arranging speakers for optimal stereo performance and room acoustics.

Guidance on setting midrange and high-frequency controls for personalized listening.

Information on recommended amplifier power and potential damage from clipping or subsonic energy.

List and brief description of the individual drivers and acoustic lens within the L220 system.

Instructions for returning the system for service or contacting JBL Technical Services.

Detailed steps for removing speaker drivers, rear panel, and dividing network for maintenance.

Description of the dense compressed wood construction, hand-fitted joints, and walnut finish.

Information on the low frequency, midrange, and high frequency drivers, including their construction.

JBL's belief in the L220's enduring listening pleasure and the importance of system synergy.

Guidance on consulting dealers or JBL Technical Services for assistance with system performance.

Detailed technical data including driver dimensions, power handling, impedance, and sensitivity.

Diagram illustrating the wiring connections between the dividing network, drivers, and input terminals.