Need help?Do you have a question about the JBL Lancer L44 and is the answer not in the manual?
Connect speaker system to amplifier's push-type terminals. Red to 8-ohm terminal, black to common/gnd.
Use 18-gage insulated wire for speaker-amplifier connections up to 50 feet. Ordinary lampcord is adequate.
Suggests 30 watts RMS per channel minimum for full dynamic range. Can handle high transient peaks.
Mounting brackets attach to enclosure back with #10 screws. Drill pilot holes before securing.
Features LE8T transducer with magnetic assembly and PR8 passive radiator for enhanced bass.
To Next Page
General
