Need help?Do you have a question about the JBL M5 and is the answer not in the manual?
Transducers| high frequency transducer | 14mm Ti Composite |
|---|---|
| midrange transducer | n/a |
| low frequency transducer | 8" Nitrile Polymer Fibre Cone |
Frequency and Sensitivity| crossover frequency | 3.5 kHz |
|---|---|
| frequency response | 50 Hz to 20 kHz (– 6 dB) |
| sensitivity | 90 dB (1 Watt/1 Meter) |
Impedance and Power| nominal impedance | 8 ohms |
|---|---|
| recommended amplifier power | 10 to 125 Watts |
Weight and Dimensions| height | 489 mm / 19[1]⁄4" |
|---|---|
| width | 254 mm / 10" |
| depth | 254 mm / 10" |
| weight | 8.2 kg / 18 lbs |
Transducers| high frequency transducer | 14mm Ti Composite |
|---|---|
| midrange transducer | 6[1]⁄2" Nitrile Polymer Fibre Cone |
| low frequency transducer | 8" Nitrile Polymer Fibre Cone |
Frequency and Sensitivity| crossover frequency | 3.5 kHz |
|---|---|
| frequency response | 45 Hz to 20 kHz (– 6 dB) |
| sensitivity | 92 dB (1 Watt/1 Meter) |
Impedance and Power| nominal impedance | 8 ohms |
|---|---|
| recommended amplifier power | 10 to 150 Watts |
Weight and Dimensions| height | 610 mm / 24" |
|---|---|
| width | 254 mm / 10" |
| depth | 305 mm / 12" |
| weight | 11.3 kg / 25 lbs |
Transducers| high frequency transducer | 14mm Ti Composite |
|---|---|
| midrange transducer | 6[1]⁄2" Nitrile Polymer Fibre Cone |
| low frequency transducer | 8" Nitrile Polymer Fibre Cone |
Frequency and Sensitivity| crossover frequency | 3.5 kHz |
|---|---|
| frequency response | 42 Hz to 20 kHz (– 6 dB) |
| sensitivity | 92 dB (1 Watt/1 Meter) |
Impedance and Power| nominal impedance | 8 ohms |
|---|---|
| recommended amplifier power | 10 to 150 Watts |
Weight and Dimensions| height | 818 mm / 32[3]⁄16" |
|---|---|
| width | 254 mm / 10" |
| depth | 305 mm / 12" |
| weight | 12.7 kg / 28 lbs |
Transducers| high frequency transducer | 14mm Ti Composite |
|---|---|
| midrange transducer | 6[1]⁄2" Nitrile Polymer Fibre Cone |
| low frequency transducer | 10" Nitrile Polymer Fibre Cone |
Frequency and Sensitivity| crossover frequency | 3.5 kHz |
|---|---|
| frequency response | 40 Hz to 20 kHz (– 6 dB) |
| sensitivity | 92 dB (1 Watt/1 Meter) |
Impedance and Power| nominal impedance | 8 ohms |
|---|---|
| recommended amplifier power | 10 to 175 Watts |
Weight and Dimensions| height | 915 mm / 36" |
|---|---|
| width | 298 mm / 11[3]⁄4" |
| depth | 305 mm / 12" |
| weight | 14.5 kg / 32 lbs |
Guidance on positioning bookshelf speakers for optimal stereo reproduction, including angle and distance.
Positioning the MR Center speaker for optimal dialog and central action sounds with TV/Monitor.
Ensures speakers are in phase for proper sound reproduction, crucial for multi-channel systems.
Guidance on selecting amplifier power to avoid distortion and potential speaker damage.
Diagnosing issues causing no sound from both or one speaker, or intermittent sound.
Addressing weak bass or poor stereo imaging, often due to polarity or placement issues.
Specific checks for AV receivers, focusing on center channel and surround sound configurations.
To Next Page
