Need help?Do you have a question about the JBL Northbridge E30 and is the answer not in the manual?
Power| max_recommended_amplifier_power | 125W |
|---|---|
| power_handling_continuous_peak | 70W/280W |
Acoustic Characteristics| nominal_impedance | 8 Ohms |
|---|---|
| sensitivity | 88dB |
| frequency_response | 50Hz – 20kHz |
Transducers| high_frequency_transducer | 3/4" (19mm) Titanium-laminate dome, shielded |
|---|---|
| midrange_transducer | NA |
| low_frequency_transducer | 6" (170mm) PolyPlas™ shielded |
Weight and Dimensions| dimensions_h_w_d | 15" x 8-7/8" x 12-1/2" (381mm x 225mm x 318mm) |
|---|---|
| weight_per_speaker | 16.5 lb/7.5kg |
Power| max_recommended_amplifier_power | 175W |
|---|---|
| power_handling_continuous_peak | 90W/360W |
Acoustic Characteristics| nominal_impedance | 8 Ohms |
|---|---|
| sensitivity | 90dB |
| frequency_response | 40Hz – 20kHz |
Transducers| high_frequency_transducer | 3/4" (19mm) Titanium-laminate dome, shielded |
|---|---|
| midrange_transducer | 4" (100mm) PolyPlas, ™ shielded |
| low_frequency_transducer | 8" (200mm) PolyPlas™ shielded |
Weight and Dimensions| dimensions_h_w_d | 36-1/2" x 9-7/8" x 12-1/4" (927mm x 250mm x 311mm) |
|---|---|
| weight_per_speaker | 35 lb/15.8kg |
Power| max_recommended_amplifier_power | 200W |
|---|---|
| power_handling_continuous_peak | 100W/400W |
Acoustic Characteristics| nominal_impedance | 8 Ohms |
|---|---|
| sensitivity | 91dB |
| frequency_response | 38Hz – 20kHz |
Transducers| high_frequency_transducer | 3/4" (19mm) Titanium-laminate dome, shielded |
|---|---|
| midrange_transducer | 4" (100mm) PolyPlas, ™ shielded |
| low_frequency_transducer | Dual 6" (170mm) PolyPlas™ shielded |
Weight and Dimensions| dimensions_h_w_d | 36-1/2" x 8-3/8" x 13-3/4" (927mm x 213mm x 349mm) |
|---|---|
| weight_per_speaker | 42.2 lb/19.1kg |
Power| max_recommended_amplifier_power | 225W |
|---|---|
| power_handling_continuous_peak | 110W/440W |
Acoustic Characteristics| nominal_impedance | 8 Ohms |
|---|---|
| sensitivity | 91dB |
| frequency_response | 36Hz – 20kHz |
Transducers| high_frequency_transducer | 3/4" (19mm) Titanium-laminate dome, shielded |
|---|---|
| midrange_transducer | 4" (100mm) PolyPlas, ™ shielded |
| low_frequency_transducer | Dual 8" (200mm) PolyPlas™ shielded |
Weight and Dimensions| dimensions_h_w_d | 40-5/16" x 9-7/8" x 15" (1024mm x 250mm x 381mm) |
|---|---|
| weight_per_speaker | 48.5 lb/21.9kg |
Guidance on the optimal placement of the E30 model when used as front speakers in a stereo or surround sound system.
Recommendations for positioning surround sound speakers to achieve the best audio experience.
Explanation of the bi-wiring technique requiring one amplifier and two sets of speaker wires for enhanced audio.
Instructions for attaching self-adhesive rubber feet to the JBL E30 bookshelf speakers for furniture protection.
Guidance on using rubber feet and metal spikes for floor placement of E60, E80, and E90 floorstanding speakers.
Warning regarding the high center of gravity of tower speakers and recommendations for wall anchoring.
Steps to diagnose and resolve issues where no sound is produced by any or a single speaker.
Troubleshooting steps for when the audio system plays at low volumes but shuts off when increased.
Guidance on resolving problems related to insufficient or absent bass response from the speakers.
Steps to diagnose and fix issues where surround speakers are not producing sound.
Detailed technical specifications for the JBL E30 bookshelf speaker model.
Detailed technical specifications for the JBL E60 floorstanding speaker model.
Detailed technical specifications for the JBL E80 floorstanding speaker model.
Detailed technical specifications for the JBL E90 floorstanding speaker model.
To Next Page
