Need help?Do you have a question about the JBL OnBeat air and is the answer not in the manual?
General| Impedance | 10000 Ω |
|---|---|
| Driver diameter | 45 mm |
| Frequency range | 70 - 20000 Hz |
| RMS rated power | 15 W |
| Audio output channels | 2.0 channels |
| Signal-to-Noise Ratio (SNR) | 80 dB |
| AUX in | Yes |
| Bluetooth | No |
| Wi-Fi standards | 802.11b, 802.11g |
| Headphone outputs | 1 |
| Headphone connectivity | 3.5 mm |
| Apple docking compatibility | iPad, iPhone, iPod |
| Power source type | AC |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 30 W |
| Dimensions (WxDxH) | 275 x 135 x 146 mm |
| Compatible products | Apple iPad Wi-Fi +3G Apple iPad Wi-Fi Apple iPhone 4 Apple iPhone 3GS Apple iPhone 3G Apple iPhone Apple iPod touch 2G Apple iPod touch Apple iPod nano 5G Apple iPod nano 4G Apple iPod nano 3G Apple iPod nano 2G Apple iPod nano Apple iPod Classic |
| Output power description | 13V DC, 2.5A |
Weight and Dimensions| Weight | 880 g |
|---|
Follow 18 key safety instructions for proper use and handling of the apparatus.
Select your home Wi-Fi SSID and enter the WEP Key or WPA Passphrase.
Explains status LED colors (white, green, amber) and patterns for unit status and Wi-Fi connectivity.
Access setup page via IP, select Manual Configuration, enter network SSID and security settings.
Solutions for no sound when LED is off, white continuously, or flashing amber.
Fixes for volume controls not working with AirPlay devices or remote control issues.
Solutions for sound crackles, hisses, or distorted audio.
Addresses loud hum or buzzing and sound coming from only one speaker.
If the Status LED is flashing amber, troubleshoot by power cycling and repeating setup steps.
Steps to resolve unsuccessful Wi-Fi connection: turn unit off/on, repeat setup steps 3-5.
To Next Page
