Release Date 2011 Discontinued Date XXXX
Technical Manual
STUDIO 580
AURAL SWEEP TEST SPECIFICATIONS:
• System Aural Sweep test: 6.0V input 40Hz to 20kHz
• LF Aural Sweep test: 5.0V input 40Hz to 1.5kHz
• HF Aural Sweep test: 1.0V input 1.5kHz to 20kHz
PHYSICAL SPECIFICATIONS:
• Dimensions (W x H x D): 42-1/16" x 9-7/8" x 13-3/4"
(1069mm x 250mm x 348mm)
• Weight: 49 lb (22.2kg)
WARRANTY:
• Refer to the warranty statement packed with the product.
*
The maximum recommended amplifier power rating will
ensure proper system headroom to allow for occasional
peaks. We do not recommend sustained operation at these
maximum power levels.
STUDIO 580
12/11
ACOUSTIC & ELECTRICAL SPECIFICATIONS
:
• Nominal impedance: 6 ohms
• Recommended amplifier
power*: 200 watts
• Frequency response: 40Hz – 40kHz (–6dB)
• Sensitivity (2.83V/m): 90dB
• Crossover frequency: 1.5kHz
SYSTEM COMPONENTS:
• Cabinet: Studio 580 cabinet (not for sale)
• Grille: 244-060-05446-0BAE
• Low-frequency transducer: Two 6-1/2" (165mm) PolyPlas
™
cones
with Symmetrical Field Geometry
™
magnet structures, cast frames
and rubber surrounds, magnetically
shielded (565J)
DC resistance: 10.0 ohms
• High-frequency transducer: 1" (25mm) compression driver with
neodymium magnet and one-piece
Teonex
®
diaphragm, magnetically
shielded (0500166001Z)
DC resistance: 3.8 ohms
• Crossover network: 013-7600-05937-E
RED
520mm
YELLOW 600mm
BLACK 600mm
GREEN 380mm
WHITE 380mm
BLACK 380mm
BLACK 380mm
RED
360mm
BLACK
360mm
WHITE
520mm
STUDIO 580 WIRING DIAGRAM
PACKAGING
To Next Page
Need help?
General
