www.jbstools.com
2
INTRODUCTION
Thank you for purchasing the JBS Hand Scissor Lift Table. The JBS Lift Table is made of
high quality steel and is designed for the lifting and transporting of loads on a level surface.
This instruction manual will help you get the best use out of your Lift Table and contains
important information regarding proper operation and maintenance. The Lift Table must be used
in a safe manner and we strongly urge you to read the safety warnings contained in this manual.
When used safely and properly maintained, you can expect years of trouble free operation.
GENERAL SPECIFICATIONS
THE JBS HAND SCISSOR LIFT TABLE FEATURES AND
SPECIFICATIONS
■
Each unit is supplied with a test certificate, parts list and instruction manual
■
Foot operated hydraulic pedal
■
Ergonomic rubber covered handle with finger tip controls
■
Special lowering valves which allow control of the rate of descent
■
Toe guards on all castor wheels
■
12 months warranty
MODEL JBSPT150 JBSPT300 JBSPT350H JBSPT500
JBS Model Number 0613 9200 0613 9268 0613 9285 0613 9319
Capacity (kg) 150 300 350 500
Maximum Platform Height (mm) 720 880 1300 880
Minimum Platform Height (mm) 220 295 355 295
Platform Size w x l (mm) 450 x 700 500 x 800 500 x 910 500 x 850
Wheel Size (mm)
Φ100 x 25 Φ125 x 40 Φ125 x 40 Φ125 x 40
Handle Height from the Ground (mm) 950 990 975 990
Net Weight (kg) 45 77 105 81
NOTE: All of the information reported herein is based on data available at the moment of printing.
We reserve the right to modify our own products at any moment without notice and incurring in
any sanction.
To Next Page
Loading...