jcb 2DX - Page 11

Braided Cutting Wire - consumable heavy duty cut-out
wire used with the glass extraction tool (above).
JCB part number - 892/00849
(approx 25 m length)
Glass Extractor (Handles) - used with braided cutting
wire (below) to cut out broken glass.
JCB part number - 892/00846
Cut-Out Knife - used to remove
broken glass.
JCB part number - 992/12800
Wire Starter - used to access
braided cutting wire (below)
through original polyurethane
seal.
JCB part number - 892/00848
'L' Blades - 25 mm (1 in) cut - replacement blades for
cut-out knife (above).
JCB part number - 992/12801 (unit quantity = 5 off)
Long Knife - used to give extended reach for normally
inaccessible areas.
JCB part number - 892/00844
4 - 2
Section 1 General Information
9803/7110
Section 1
4 - 2
Issue 2
Service Tools
(cont'd)
Section B - Body & Framework
S186320
S186310
S186360
S186330
S186350
S186340