1 - 2
Unit Identification
The engine serial number is stamped on a plate mounted on
the left hand side of the cylinder block (looking towards the
front of the machine).
The rear axle serial number is stamped on a plate mounted
to the front face of the axle, as shown below.
The front axle serial number is stamped on a plate mounted
to the rear face of the axle, as shown below.
Section 1 General Information
9803/7110
Section 1
1 - 2
Issue 1
175510
175520
The Syncro Shuttle serial number is stamped on a label
which is mounted to the rear face of the unit.
To Next Page
Loading...
