Need help?Do you have a question about the jcb 406 and is the answer not in the manual?
General| Brand | jcb |
|---|---|
| Model | 406 |
| Category | Compact Loader |
| Language | English |
Provides a disclaimer for the Quick Reference Guide, stating it does not replace the Operator's Manual.
Defines the machine's purpose, applications, and limitations, including what it is not intended for.
Details key dimensions like length, wheelbase, height, and weight distribution for different models.
Lists engine type, power, transmission, and axle configurations for the 406, 407, and 409 models.
Specifies dump angle maximum and rollback angles at various positions for the loader.
Provides measurements for load over height, dump height, dig depth, and pin height.
Details bucket type, capacity, weight, and tipping load capacities for different models.
Outlines reach dimensions and payload capacities for the loader attachments.
Guides on how to safely tie down the machine for transport.
Details the correct lifting points and safety precautions for lifting the machine.
Provides detailed information on lifting points and chain angles for safe lifting operations.
Identifies and explains the various controls and indicators within the operator's cab.
Lists and explains the indicators and functions on the front console for the 406 model.
Explains the indicators and functions on the front console for the 407 and 409 models.
Identifies various switches located on the roof and right-hand console.
Step-by-step guide for starting the machine, including key insertion and pre-heating.
Explains the directional switches and buttons on the main joystick.
Details how to select and adjust creep speed, including locking the setting.
Instructions for engaging and disengaging the high road speed mode.
Explains manual control configurations for the 406 model, with and without differential lock.
Explains servo control configurations for the 407 & 409 models, with and without differential lock.
Explains the primary functions of the joystick, including arm raise, lower, dump, and crowd.
Warning against using the 'float function' as a ground detent due to potential damage.
Steps to unlock the Q-hitch and couple attachments securely.
Procedure for locking attachments using auxiliary service and coupling hydraulics.
Step-by-step guide for safely shutting down the machine and removing the key.
Details how to prepare the machine for maintenance by parking and isolating it.
Lists essential daily checks to ensure proper machine operation and safety.
Outlines recommended weekly checks for routine machine maintenance.
Shows the location of the engine cover, hydraulic oil, and washer fluid fillers.
Identifies the location of the engine oil dipstick and filler cap.
Indicates the locations of secondary fuses, relays, and the coolant filler.
Details fuel tank capacity and recommended engine oil types for different models.
Specifies oils for axles, hydraulic systems, and recommended grease types.
Lists weights and intended uses for common machine attachments like shovels and forks.
Provides solutions for the machine not starting or hydraulics not operating.
Troubleshooting for immobiliser code acceptance and coded key functionality.
Solutions for Q-hitch not unlocking and quick release couplings not engaging.
Assistance for problems preventing the machine from driving.
To Next Page
