Introduction
Safety Labels
21 21
9821/1350-8
Part Numbers and Description
JS1
Part Number: 817/18528
Description: Strike to whole body (machine swing). Keep
a safe distance from the machine.
JS2
Part Number: 817/18535
Warning, coolant under pressure.
Warning, risk of severing of hands/
fingers in rotating parts. Warning, hot
surfaces. Remove ignition key and
refer to operator handbook and
maintenance manual.
JS3
Part Number: 817/18532
Description: Pressure hazard. Stop
the engine, remove the starter key
and refer to Releasing the Hydraulic
Pressure (Routine Maintenance
Section) before you start
maintenance work.
JS4
Part Number: 333/P5908
Warning, Read the
operator manual before
operating the machine.
JS5
Part Number: 817/19470
Warning, arm or bucket may move;
keep clear.
JS6
Part Number: 817/18529
Warning, Damage may occur when
starting in cold temperatures, refer to
Warming up & Operating in Cold
Climate (Operation Section).
Warning, Risk of electrocution,
maintain the minimum clearance
recommended by your local electricity
supplier. Warning, risk of injury by
crushing, do not lean out of the
window.Warning, Risk of tripping,
raise the control lock lever before
exiting.
JS7
Part Number: 817/18536
Burns to fingers and hands. Stay a
safe distance away.
JS8
Part Number: 817/18537
Warning, High pressure and hot
Coolant/Steam; Keep hands away.
JS9
Part Number: 817/18566
Do not walk or place any body weight
in this area.
817/18537
To Next Page
Loading...
Need help?
General
