Insert Isolator Key
2
Turn clockwise
Fasten Seat Belt
3
Climb into the cab and
fasten/adjust the seat belt
Set to Neutral
4
Ensure the machine is not in
gear and the parking brake is on
Insert Key and Start
5
Turn the key to position II until
the engine starts
Operate Hydraulics
6
Operate hydraulics to make
sure each function is working
Connect LPG Tank
1
Should be positioned in the
cradle and secured; connect the
tank to the hose making sure it
is tight. There should be an
audible release of gas into the
hose.
To Next Page
Loading...
