Need help?Do you have a question about the jcb S4046E and is the answer not in the manual?
General| Platform Height | 39 ft 4 in |
|---|---|
| Weight | 7, 320 lbs |
| Drive Speed | 2.2 mph |
| Gradeability | 25 % |
| Power Source | Electric |
| Platform Capacity | 772 lbs |
| Overall Width | 3 ft 9 in |
| Overall Length | 2.44 m |
| Machine Width | 3 ft 9 in |
| Lift Capacity | 772 lbs |
| Drive Speed - Elevated | 0.8 km/h |
| Turning Radius (Outside) | 2.44 m |
| Tyre Type | Non-marking |
| Max Capacity | 772 lbs |
| Working Height | 4.57 m |
| Working Height Maximum | 4.57 m |
| Platform Length | 2.44 m |
Guidance on safe operation and understanding the manual.
Emphasizes the critical importance of operator and bystander safety.
Explains the meaning of signal words (DANGER, WARNING, CAUTION) used in safety notices.
Covers training, alertness, clothing, alcohol, drugs, and mobile phone use.
Addresses lifting, lightning, machine modifications, electrical safety, and raised machine risks.
Covers training, machine condition, limits, communication, and parking.
Addresses banks, trenches, barriers, sparks, regulations, and electrical safety.
Covers worksite inspection, risk assessment, personnel, speed, and load limits.
Daily checks for cleanliness, damage, controls, and safety equipment.
Steps for safely stopping and parking the machine, including brake checks.
Safety precautions and limitations when driving on slopes.
Safety measures for platform use and precautions near electrical lines.
Covers tipping, crushing, collision hazards, and information decals.
Emergency platform lowering and brake release procedures.
Procedures for safely loading and securing the machine onto a transport vehicle.
Covers general safety, hydraulic systems, and fluid handling precautions.
Safety for Li-ion batteries and first aid for electrolyte exposure.
Detailed safety for Li-ion batteries, including potential hazards.
Table detailing daily, weekly, and periodic checks for components and fluids.
Table listing functional tests required at various service intervals.
Procedures to make the machine safe before starting maintenance.
Safety precautions when performing maintenance with the platform raised.
Procedures for connecting/disconnecting hoses and checking oil levels.
Checks for electrical equipment and battery cleaning for lead-acid types.
Procedures for safely connecting and disconnecting battery leads.
Table of error codes, their descriptions, reactions, and operator instructions.
Additional fault codes, overload alarms, and machine tilted warnings.
To Next Page
