54
Other call settings
when enabled prompts you at
the 50th second of every minute during a
conversation.
Select
.
when enabled displays your ID to the
recipient when you call or send a message. However
this service must be supported by your network.
To enable this option, select
.
To view whether the option is enabled or not, select
.
Review call information
.
The following options are available:
• displays the duration of the last call.
• displays the transmitted bytes of
the last GPRS service.
• displays the duration of all the
incoming or outgoing calls. Select
to restart the counter or meter.
• if enabled, displays the duration and
charges of the call. Disabled mode is the
default mode.
• If you want to enable this function, you need to
acquire a PIN2 code from your network operator.
• this service is only available when
To Next Page
Loading...
Need help?
General
