JCM GOLD G-105 User Manual

1
1. BEFORE OPERATING THE REGISTER
1-1 General Precautions
- The shock of impact can damage the register, Install the register on a stable and level
place.
- Do not move the register with the power ON.
- Be careful not to spill liquids on the register, or drop metallic objects such as paper clips
into it.
- To clean the register, wipe it with a soft, dry cloth, Do not use solvents such as
thinner, alcohol or benzene.
- If you leave the register unused for a long time, unplug the power cord.
1-2 Choosing a Location for the Register
Avoid locations where the register would be exposed to:
- excessive dust
- vibration
- high humidity
- extremely high or low temperature
- rapid changes in temperature direct sunlight
- direct heat from a heating appliance
CAUTION : Do not use this cash register outdoors in the rain or near any source of
liquid
If the register is used near a radio or television set, it may interfere with reception. If
this problem occurs, try reorienting the register or the TV/radio antenna, or move the
register away from the set.
1-3 Power
The register rated at 220V runs on standard power from wall outlet.
Do not connect the register to the same outlet as a heavy-duty appliance that
generates electrical noise, such as refrigerator or air conditioner.

JCM GOLD G-105 Specifications

General

Brand	JCM GOLD
Model	G-105
Category	Cash Register
Language	English

Summary

Before Operating the Register

General Precautions

Precautions for handling, placement, and cleaning the register to prevent damage.

Power Requirements

Details on the register's power rating and connection recommendations.

Setting Up the Register

Initializing the Register

Step-by-step procedure to reset and initialize the cash register.

Inserting or Replacing Batteries

Instructions and cautions for installing or changing backup batteries.

Loading the Paper Roll

Guide for correctly installing receipt and journal paper rolls.

Specifications

Memory Capacity

Details on the register's memory capacity for various functions.

Programming

Time Setting

Procedure for programming the current time into the register.

Date Setting

Procedure for programming the current date into the register.

Consecutive Number and Clerk Code Programming

Steps to program consecutive numbers and clerk identification codes.

Department Key Programming

Guide for programming department keys, including tax and price settings.

PLU Programming

Instructions for programming Price Look-Up (PLU) codes and prices.

Terminal Status 1 Programming

Terminal Status 2 Programming

Tax/VAT Programming

Procedure for programming tax rates and tax-free amounts.

% Key Programming

Operation

Clerk Code Registration

Registering a Single Item Sale and Tendering Change

Registering a Sale to Multiple Items

Registering a Charge Transaction

Using Split Tendering

Minus (-) Key Transactions

Percent Discount (%) Transactions

Using a Fixed PLU Price

Void Operation

Procedures for voiding previous entries or entire transactions.

Refund Operation

Steps for processing refunds for single or multiple items.

Reporting

Sales Reports

Daily Terminal Sale Reports

Daily Clerk Sales Reports

PLU Sales Reports

Maintenance

Cleaning

Replacing the Printing Paper