JD Williams Aspen - Cabinet Frame Assembly Step 3; Step 3: Attach Runners to End Panels

Assembly Instructions
6
0314
Step 3
H
H
E
E
Important :-
Lay end panels out
as shown
Position the runner so
that the front hole
of the runner lines up
with the pre-drilled hole
nearest to the edge of
the panel.
Use screws to secure
the runner.
Slide the runner forward
revealing the back of the
runner. The third hole
to the back of the runner
should now line up with
the second pre-drilled
hole.
Repeat to add runners
to additional holes.
E
Front of runner
H
x8
E
x16
Attaching runners to
end panels
0314
Important :-
Lay end panels
out as shown