4. Depress and release the brake pedal
5. Ignition to OFF position
6. Ignition goes from the OFF position to the RUN
position 3 times and ends at RUN position
7. Horn will ring once and the TPMS indicator
flashes, then the learning mode has been
successfully entered. If equipped, the message
center will display the front left (LF) tire
Operation Instruction:
Notice:
1. When using Super EL50448, please make sure
antenna fit in correct position.
2. Please make sure the 9v battery in good
condition.
Manufacture: JDiag Electronics Technology Co.,Ltd.
Address: 5th floor,building 1,Binxianghua Industrial Park,7
Huada str,Longhua District,Shenzhen,Guangdong,P.R.
China.
Tel: +86-755-21005135
Fax: +86-755-21005135
Website: http://www.jdiag.com
To Previous Page
Loading...
Need help?
General