JDW CE124 - Maintenance Schedule

MAINTENANCE SCHEDULE
REGULAR SERVICE PERIOD
Perform at every indicated month
or operating hour interval,
whichever comes first.
Before
Each
Use
First
Month
or
5hrs Use
Every 3
Months or
25hrs Use
Every 6
Months
or
50hrs Use
Every
Year or
100hrs
Use
Every
Two
Years or
250hrs
Use
Engine oil
Check
O
Replace
O
O
Air cleaner
Check
O
Replace
O
Spark plug
Check or Adjust
O
Replace
O
Fuel tank & filter
Clean
O
Fuel tube
Check
Every 2 years (Replace if necessary)
Valve clearance
Check or Adjust
O
Combustion
chamber
Clean
After every 200 hours
TUNE UP SPECIFICATIONS
ITEM
SPECIFICATION
MAINTENANCE
Spark plug gap
0.028-0.031in (0.7-0.8 mm)
See Manual
Valve clearance (cold)
IN:0.06±0.02mm
EX;0.08±0.02mm
See your authorised dealer
Other specifications
No other adjustments needed.
STORAGE
For trouble free service, make sure the machine is clean and dry before storing.
Please ensure the machine is stored away from direct sunlight, especially if fuel is kept in the
machine.
Store indoors or in a safe, locked protected area during severe weather and winter months.
DO NOT STORE in an enclosed area, where fuel vapors can reach an open hot flame.
DO NOT STORE fuel in the machine. Ensure fuel is removed from the fuel tank and carburetor.
If storing for an extended period, inspect, clean and repair the machine if necessary. Remove all fuel
from the fuel tank. Start the engine, run until the fuel tank, line and carburetor are clear of fuel.
Remove the spark plug cap and spark plug, pour a small quantity of 4-stroke oil into the spark plug
hole of the engine cylinder and re-seat the spark plug. Store in a clean, dry, dust free area.
Ensure the machine is stored in a position, where any persons cannot step on to attempt to reach
items up high, due to risk of movement.