Jebao AL Series - Installation for AK-70, AK-80

5.2 AK-70, AK-80
Installation Steps
：
1) Connect the Bracket Part 1 and the Mounting Base with the Bracket Screw.
2) Fix the Mounting base to the tank with Clamping Screw.
3) Connect Bracket Part 1 and Bracket Part 2 with the Bracket Screw.
4) Attached the Light body to the Bracket Part 2 and fix it by tighten the Light
Screw.
Light body
Clamping Screw
Mounting Base
Bracket Screw
Bracket Part 1
Bracket Part 2
Light Screw
Bracket Screw