Jebao AL Series - Wi-Fi and ON;OFF Button Instructions

6.2 Instruction
1) Press ON/OFF Button to turn on or off the light, or adjust brightness
manually. The brightness changes from 0%-10%-25%-50%-80%-100%
each time.
2) Press Wi-Fi button for about 5 seconds and the Wi-Fi indication light starts
flashing alternately in green and red. The light is into smart configuration
mode.
3) Press Wi-Fi button for about 10 seconds and the Wi-Fi indication light
starts flashing simultaneously in green and red. The light is into AP
configuration mode.
4) The Wi-Fi indication light is green color when connection is successful.