Smart Wave Maker
MCP
、
MLW
、
MOW Series
5. Wait for the device to connect, and top the device to enter the
control interface.
Notice：
1. You may be asked to restart configuration process all over
again if the Wi-Fi password input is incorrect.
2. Make sure the device, mobile phone and router are placed as
close as possible.
3. AP direct connection is only suitable for close control of the
device in a non-Wi-Fi environment.(Manual calibration time is
required when the equipment is directly connected to AP after
delivery. See VII.4 Pump Management for detail.)
To Next Page
Loading...
Need help?
General
