Jebao MOW Series User Manual

Smart Wave Maker
MCP
、
MLW
、
MOW Series
APP mention and error code:
Er01: Controller over current;Abnormal Working current; Check
if the pump short of voltage or the controller broken.
Er02: Controller over heat; Controller overheating; Check
whether the controller exposed to the sunshine or in high
temperature environment.
Er04: The pump was blocked; The impeller stops running, clean
the pump and impeller to ensure the impeller is clean
and work.
Er05: Controller overvoltage; Abnormal Working voltage; Check
the input supplying voltage.
VIII. Warning
1. To ensure the product performance, do not run without water.
2. Select a dry place to locate the controller to prevent water
splashed on it.
3. Be careful when assemble the magnet, better to shift parallel
the pad close to the outside wall of fish tank to prevent breaking
the fish tank.
4. Don’t disassemble the controller and adaptor without
professional guidance

Jebao MOW Series Specifications

General

Brand	Jebao
Model	MOW Series
Category	Water Pump
Language	English