Wireless Controller for Wave Maker
User’s Manual
Matched Models, RW4/8/15/20 and WP10/25/40/60
Company：Jebao(Zhongshan)Electrical Appliance Co.Ltd
Address：Tongmao Industrial Park, Dongsheng Town, Zhongshan city.
Guangdong Pro. China
Tel.: +86-760-28136717/20/21 Fax: +86-760-28136725
E-Mail: info@jebao.com Website: www.jebao.com
Jebao wave makers are intended to simulate the natural waves and
whirlpools found in a marine environment.
Before installing and using the controller, please read through these
instructions to familiarise yourself with the correct operation of the device.
Features:
1. Unique wireless multi- mode controller to allow adjustment of the
wave maker to suit the users requirements.
2. Use of low-voltage, low power, DC variable-speed pump for safe
operation.
3. Easy adjustment & operation.
4. Wireless communication with other Wireless Controllers
Installation Instructions:
1. Accessories: Intelligent controller, power adaptor, mains cable, double
sided tape, instruction manual.
2. Assembly: Remove one side of the double-sided tape and stick to the
rear of the controller. Remove the other side of the double-sided tape and
affix the controller in a suitable location.
3. Attach the 3-pin waterproof connector from the pump to the controller.
Then attach the DC plug to the controller. And attach the AC cable of the
adaptor.
To Next Page
Need help?
General