Jecod AF Series User Manual

AF Series Auto Fish Feeder
USER’S MANUAL
Warning:
1. To ensure personal safety, children or people without the
ability to identify danger are prohibited from using the device.
2 Do not disassemble the device to avoid damage.
3. Do not let children play with this product.
4. The battery should be pulled out, if the device will be idle
for long time.
Please subject to the actual products due to technology upgrade.
I. Introduction
AF series feeder is under IC smart control, which can
manually set feeding time and quantity. Suitable for fish
tanks of different sizes. It can meet the daily needs of
aquarium enthusiasts for feeding fish. In order to use this
product correctly, please read and understand the
instructions carefully before installation and use.
II. Control Panel
Timing icon
Feed icon
Portion size
icon
Switch Button
Set Button
Manual/Save Button
Time Button
Program
Button
Portion
Button
Battery icon
The number of days
between feedings
byte1 byte2 byte3 byte4
Product Features
1. Built-in 3 AA batteries (rechargeable), no external power
supply (AA batteries need to be purchased by the user).
2. Daily feeding time can be set.
3. Feeder can be set to synchronize with the local time.
4. Auto fish feeding on time, up to 6 feeding times per day,
set the daily feeding time for each meal.
5. Food quantity of per feeding can be set freely (No.1-No.9),
maximum up to 9 times
6. Small size and multi-function.
7. LCD display to display time and feeding parameters.
8. The capacity of the installed extension hopper can
reach 250ml or even 500ml.
9. Easy to fill the food.
10. This product is suitable for granulates up to 3 mm.
III. Installation & Accessories
Battery compartment
Screw
Extended
Feed silo
Cover
Outlet
Knob
Feed silo
360°
1.
Installation Instructions:
1) Installation:
① Install the bracket, and install the adjustment knob to the
edge of the aquarium. The maximum glass thickness is
15mm.
② Install the base on the platform through the suction cup.
2. Replacement Instructions:
1) Accessories include: base, feeding ring, sucker, 3 AA
batteries.
2) The extended hopper can be dismantled. If there is no need
to the extended hopper, the upper cover can also be
disassembled and installed on the hopper.
3) To replace the battery, you need to disassemble the battery
compartment (only the AA battery can be replaced).
4) To add feed, open the top cover o the hopper and pour in
the feed.
IV. Factory Settings
Number of meals
Feeding time
Volume
(Servings/meal)
1
8:00
2
2
20:00
2
-
-
-
Explain: ”-” is unset;
Running time is 2 seconds per serving.
V. Functional Configuration
1. Memory function: No need to reset parameters after each
power failure.
2. Operation keys: Set parameters according to II. Control
Panel.
3. The Feed icon is displayed when manual feeding or auto
feeding is on.
4. Power display: Displays the current battery.
VI. Control Process
Timing icon
Feed icon
Portion size
icon
Battery icon
The number of days
between feedings
byte1 byte2 byte3 byte4
Main interface (Standby state)
1. Feeding starts when it comes to the preset feeding
time.
2. The main screen shows the next feeding time, current
battery, and the charging status (as shown in the picture
above).
VII. Operation Settings
1. Time Setting
Timing icon
Feed icon
Portion size
icon
Switch Button
Set Button
Manual/Save Button
Time Button
Program
Button
Battery icon
The number of days
between feedings
byte1 byte2 byte3 byte4
Time diagram
Movable
Base

Jecod AF Series Specifications

General

Brand	Jecod
Model	AF Series
Category	Aquariums
Language	English

Summary

General Safety Warnings

User Safety Precautions

Prohibits use by children or individuals unable to identify danger; advises against disassembly and allowing children to play with the device.

Battery Handling

Instructs to remove the battery if the device is idle for an extended period.

Introduction to AF Series Auto Fish Feeder

Product Overview

Describes the IC smart-controlled feeder for manual time/quantity setting, suitable for various tank sizes.

Control Panel and Product Features

Control Panel Layout

Details the buttons (Switch, Set, Manual/Save, Time, Program, Portion) and display icons (Battery, Timing, Feed, Portion Size).

Key Product Features

Highlights AA battery operation, daily/sync time setting, up to 6 feedings/day, adjustable food quantity, small size, LCD display, and hopper capacity.

Installation and Accessories

Installation Steps

Guide to installing the bracket on aquarium edges (max 15mm glass) and the base via suction cup.

Included Accessories

Lists accessories: base, feeding ring, sucker, 3 AA batteries, and mentions the optional extended hopper.

Battery Replacement and Feeding

Instructions for replacing batteries and adding feed by opening the top cover.

Factory Settings and Functional Configuration

Factory Default Settings

Specifies default feeding times (8:00, 20:00) and volumes, noting '-' indicates unset.

Functional Configuration

Explains memory function, operation key usage, Feed icon display, and battery power display.

Control Process and Operation Settings

Main Interface (Standby State)

Describes the feeder's standby display showing next feeding time, battery status, and charging status.

Time Setting Process

Details how to set the device's clock using the Switch, Set, and Time buttons.

Operation Settings: Feeding Times and Portions

Clock Setting

Step-by-step guide to enter time setting interface and set hours/minutes.

Feeding Time Setting

Procedure to set up to 6 daily feeding times, indicating feeding on the hour.

Feeding Portion Setting

Instructions to check and adjust servings per meal, up to 9 portions, with each portion lasting 2 seconds.

Manual Feeding

How to initiate manual feeding for a single meal, with a 2-second running time.

Feeding Interval Setting

Guide to set the interval between feedings, up to 7 days, with a default of 0.

Maintenance and Troubleshooting

Maintenance Guidelines

Advises on indoor use, cleaning the canister and bolt monthly to prevent feed clumping.

Troubleshooting Common Issues

Addresses issues like no display, unresponsive display, and impeller not feeding.

Disposal Instructions

Product Disposal

Specifies not to dispose as unsorted waste, but at an authorized recycling place for electronics.