Need help?Do you have a question about the Jedia JPA-1060 and is the answer not in the manual?
Lists key features of the amplifier and tuner models, including input adjustments and special functions.
Covers the master volume, tone adjustments (bass, treble), and the power switch for the unit.
Details MIC inputs, source selection switches, and chime/siren activation buttons.
Includes speaker selection, output level display, and the blank panel for module installation.
Includes switches, display, volume, and tuning functions for the FM/AM tuner.
Details buttons for playback, tape handling (rewind, fast forward), and direction.
Controls for powering on the tuner and viewing its operational status and frequency.
Features band selection, frequency tuning, and preset station recall for radio reception.
Adjusts the audio output volume level specifically for the tuner's signal.
Buttons for play, pause, rewind, fast forward, and eject operations for cassette tapes.
Includes volume control and the LED indicator for tape direction.
Covers AC power connection, DC backup terminal, and fuse holders for protection.
Terminals for connecting FM/AM antennas and telephone systems for music on hold.
A switch to set the correct impedance for connected speaker outputs.
Details MIC/LINE inputs, phono/line selection, and pre-amp/amp connections.
Includes the GND terminal for hum reduction and speaker output terminals.
Covers remote chime activation, telephone paging input, and mute control.
Step-by-step instructions for installing and connecting the FM/AM tuner module.
Instructions for installing and connecting the cassette deck module.
Guidance on connecting FM antennas, including coaxial and indoor types.
Instructions for connecting AM lead and outdoor antennas, plus earthing requirements.
Illustrates how to connect speakers to 8-ohm, 4-ohm, and high-impedance terminals.
Diagram showing how to connect antennas, speakers, microphones, and other audio sources.
Technical details on rated power, frequency response, THD, and input sensitivity for the amplifier.
Technical details on tuning range, antenna input, and usable sensitivity for the tuner.
Technical details on signal-to-noise ratio, wow & flutter, and tape speed for the cassette deck.
Includes power source, dimensions, and weight for all main units.
Illustrates the internal signal paths and functional blocks of the audio system.
To Next Page
General
