Need help?Do you have a question about the Jedia L6.0 and is the answer not in the manual?
General| Weight | 8.5 kg |
|---|---|
| Type | Amplifier |
| Frequency Response | 20Hz - 20kHz |
| Input Impedance | 47k ohms |
| THD | <0.05% |
General warnings regarding electric shock, fire, and proper installation to prevent hazards.
Detailed safety guidelines for installation, wiring, and operation to ensure user safety.
Overview of key features including high efficiency, EIC engine, protection circuits, LED meters, and variable filters.
Details on front panel LEDs including signal, clip/lim, protection, and power status indicators.
Controls for adjusting the audio volume level for each channel (A and B).
The main switch used to turn the amplifier's power on or off.
Important notes on powering sequence, volume handling, and switching off procedures for safe operation.
Connection point for the AC power cord, with safety precautions.
Balanced XLR and PHONE input connectors for audio signal input.
Connectors for outputting amplified audio signals to speakers.
Switch to select the amplifier's operating mode: Stereo, Bridge Mono, or Parallel.
Switches for activating the clip limiter and configuring ground lift to manage signal issues.
Dedicated mono output connector, convenient for sub woofer speaker system inputs.
Options to configure filter modes including Full Range, Sub Woofer, X-Over, and Low Cut.
Guidance on installing the amplifier in a standard 19-inch rack or as a tabletop unit.
Recommendations for ensuring adequate ventilation and airflow around the unit for optimal cooling.
Advice on securing the amplifier in a rack, emphasizing the need for more than just front plate fastening.
General instructions and precautions for wiring the amplifier into a sound system.
Detailed guide and diagram for connecting the amplifier in Stereo (2-Channel) mode.
Instructions and diagram for connecting the amplifier in Bridge Mono mode for higher power output.
Instructions and diagram for connecting the amplifier in Parallel mode for driving multiple speakers.
Wiring diagram for setting up a stereo system with sub woofer speakers.
Wiring diagram for a center speaker system configuration.
Wiring diagram for a second center speaker system configuration.
Wiring diagram for a 2-way crossover speaker system setup.
Detailed output power specifications for various L-Series models in stereo and bridged modes.
Technical and general performance specifications including frequency response, sensitivity, and damping factor.
Information on power consumption, physical dimensions, and weight of the amplifier units.
A block diagram illustrating the internal structure and signal flow of the amplifier.
To Next Page
