•
First fold the rear seat forward following steps 1
through 3 under “Fold and Tumble Rear Seat” in this
section.
•
Press down on release bar on each side, and pull seat
out and away from lower bracket.
•
Remove seat from the vehicle.
Replacing the Rear Seat
Reverse steps for removing the seat. Be certain to pull the
seat belts between the seat cushion and seatback. Position
them for passenger use.
WARNING!
•
To help protect against personal injury, passen-
gers should not be seated in the rear cargo area
with the rear seat folded down or removed from
the vehicle.
•
The rear cargo space is intended for load carrying
purposes only, not for passengers, who should sit
in seats and use seat belts.
54 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
To Next Page
Loading...
