2. Install right panel first, then the left panel.
3. Reinstall panel(s) using the same steps for removal in
reverse order.
Rear Panel Removal
1. Remove both front panels. Refer to “Front Panel(s)
Removal” in this section.
2. Open both doors.
3. Remove the two (2) Torx威 head screws which secure
the hard top at the B-pillar (near top of door) using a #40
Torx威 head driver (4 Door Only).
4. Remove the six (6) Torx威 head screws which secure the
hard top to the vehicle (along the interior bodyside) using
a #40 Torx威 head driver.
5. Open swing gate all the way to ensure clearance of the
rear window glass. Lift rear window glass.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129
3
To Next Page
Loading...
