4. Remove 1 hex bolt (13mm) visible through the plastic
trim on bottom side of side bar, 1 hex bolt (13mm) on the
side of the side bar, and 1 hex bolt (13mm) on top of the
side bar.
NOTE: Pull side bar out horizontally when removing.
CAUTION!
Do not remove the head impact foam from the side
bars, as damage to the foam may result.
NOTE: Store all of the mounting bolts in their original
threaded holes and tighten for safekeeping.
5. Remove side bar assembly, and reattach sport bar
Velcro covering.
6. To safely store the side bars in your vehicle, use four
cinch straps (available from your authorized dealer).
Attach the straps through the slots located on the floor
behind the folded rear seat at the front of the storage bin
cover.
190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
To Next Page
Loading...
