The driver may manually override the haptic
warning by applying torque into the steering
wheel at any time. When only a single lane
marking is detected and the driver unintention-
ally drifts across the lane marking (no turn
signal applied), the LaneSense system provides
a visual warning through the instrument cluster
display to prompt the driver to remain within
the lane. When only a single lane marking is
detected, a haptic (torque) warning will not be
provided.
NOTE:
The LaneSense system can be customized and
turned off through the Uconnect System touch-
screen.
For further information and applicable warn-
ings and cautions, please refer to your Owner’s
Manual at www.jeep.com/en/owners/manuals.
Identifying Your Radio
Radio 3.0
• 3.0” Display
• Two buttons on the faceplate on either side
of the display
• Six radio preset buttons on the underside on
the radio screen.
Uconnect 5.0
• 5.0” Full Color Touchscreen Display
• Bluetooth Connectivity/Bluetooth Streaming
Audio
Radio 3.0
Uconnect 5.0
UCONNECT
To Next Page
Loading...
