Jeep 2017 RENEGADE - GETTING TO KNOW YOUR VEHICLE; GETTING TO KNOW YOUR INSTRUMENT PANEL; SAFETY; STARTING AND OPERATING

Opening
To unlock the liftgate, use the key fob or acti-
vate the power door lock switches located on
the driver door handle.
To open the liftgate, squeeze the electronic
liftgate release and pull the liftgate open with
one fluid motion.
The Liftgate Passive Entry unlock feature is
built into the Electronic Liftgate release. With a
valid Passive Entry key fob within 5 ft (1.5 m) of
the Liftgate, push the Electronic Liftgate re-
lease to open with one fluid motion.
Closing
Grasp the liftgate closing handle and initiate
lowering the liftgate. Release the handle when
the liftgate takes over the closing effort.
NOTE:
Before closing the liftgate, make sure to be in
possession of the key because the liftgate may
be locked.
To Lock The Liftgate
With a valid Passive Entry key fob within 5 ft
(1.5 m) of the liftgate, pushing the Keyless
Enter-N-Go — Passive Entry lock button lo-
cated to the right of the outside handle release
will lock the vehicle.
NOTE:
The liftgate unlock feature is built into the
electronic liftgate release.
For further information and applicable warnings
and cautions, please refer to your Owner’s
Manual at
www.jeep.com/en/owners/manuals.
Passive Entry Liftgate Handle Location
LIFTGATE