TECHNICAL SPECIFICATIONS 303
ENGINE FLUIDS AND LUBRICANTS
2.4L Engine 7.2 Quarts 6.8 Liters
3.2L Engine 10 Quarts 9.5 Liters
* Includes heater and coolant recovery bottle filled to MAX level.
Component Fluid, Lubricant, or Genuine Part
Engine Coolant
We recommend using Mopar® Antifreeze/Coolant 10 Year/150,000 Mile
(240,000 km) Formula OAT (Organic Additive Technology) or equivalent
meeting the requirements of the manufacturer Standard MS.90032.
Engine Oil – 2.0L Engine
We recommend using Mopar® API SP/GF-6A Certified SAE 5W-30 Full
Synthetic Engine Oil which meets the requirements of the manufacturer
Material Standard MS-13340. Equivalent full synthetic 5W-30 API SP engine
oil can be used but must have the API Donut trademark Ú page 255.
CAUTION!
Failure to use the recommended API SP/GF-6A or equivalent oil can cause
engine damage not covered by the vehicle warranty.
Engine Oil – 2.4L Engine
We recommend using Mopar® SAE 0W-20 Full Synthetic Engine Oil which
meets the requirements of the manufacturer Material Standard MS-6395.
Equivalent full synthetic SAE 0W-20 engine oil can be used but must have the
API Starburst trademark Ú page 255.
Engine Oil – 3.2L Engine
We recommend using Mopar® SAE 5W-20 Full Synthetic Engine Oil which
meets the requirements of the manufacturer Material Standard MS-6395.
Equivalent full synthetic SAE 5W-20 engine oil can be used but must have the
API Starburst trademark Ú page 255.
US Metric
9
22_KL_OM_EN_USC_t.book Page 303
To Next Page
Loading...
Need help?
General
