AutoStick威 is deactivated:
•
By holding the shift lever to (+) momentarily
•
When the shift lever is shifted out of DRIVE
•
When in sixth position, touching the shift lever to the
right
•
When heavy Anti-Lock Brake System (ABS) applica-
tion is detected
General Information
•
If a ratio other than first is selected and the vehicle is
brought to a stop, the transmission control logic will
automatically select the first gear ratio.
•
If a low range is selected and the engine accelerates to
the rev limit, the transmission will automatically select
the next higher ratio.
•
If a downshift would cause the engine to overspeed,
that shift will not occur until it is safe for the engine.
However, the CVT will stay in the manually selected
ratio.
•
If the system detects powertrain overheating, the
transmission will revert to the automatic shift mode
and remain in that mode until the powertrain cools off.
•
If the system detects a problem, it will disable the
AutoStick威 mode and the transmission will return to
the automatic mode until the problem is corrected.
5
STARTING AND OPERATING 303
To Next Page
Loading...
