FLUIDS AND LUBRICANTS
Engine
Component Fluid, Lubricant, or Genuine Part
Engine Coolant We recommend you use Mopar Antifreeze/Coolant 10 Year/150,000 Mile
(240,000 Kilometers) Formula OAT (Organic Additive Technology) meet-
ing the requirements of FCA Material Standard MS.90032.
Engine Oil – 1.4L Gasoline Engine We recommend you use 0W-30 ACEA C2 – FCA 9.55535-GS1 synthetic
engine oil.
Engine Oil – 1.6L Diesel Engine We recommend you use 0W-30 ACEA C2 – FCA 9.55535-DS1 synthetic
engine oil.
Engine Oil – 2.0L Diesel Engine We recommend you use 0W-30 ACEA C2 – FCA 9.55535-DS1 synthetic
engine oil.
Engine Oil Filter We recommend you use a Mopar Engine Oil Filter.
Spark Plugs – Gasoline Engines We recommend you use Mopar Spark Plugs.
Fuel Selection – 1.4L Gasoline Engine Minimum of 95 Research Octane Number (RON) specification EN228
Fuel Selection – Diesel Engines Diesel fuel conforming to the European specification EN590
Chassis
Component Fluid, Lubricant, or Genuine Part
Manual Transmission – If Equipped We recommend you use Mopar C Series Manual & Dual Dry Clutch
Transmission Fluid.
Automatic Transmission 6 Speed (FWD Models) – If Equipped Use only Mopar AW-1 Automatic Transmission Fluid or equivalent. Failure
to use the correct fluid may affect the function or performance of your
transmission.
259
To Next Page
