parking position. If the driver is satisfied with the
vehicle position, they should shift to PARK.
Perpendicular Parking Space
Assistance Operation/Display
When the ParkSense Active Park Assist system
is enabled, the “Active ParkSense Searching -
Press
or to Switch Maneuver” message
will show in the instrument cluster display. You
may switch to parallel if you desire. The arrow
buttons on the left side of the steering wheel can
be used to switch parking maneuvers.
NOTE:
• When searching for a parking space, use the
turn signal indicator to select which side of
the vehicle you want to perform the parking
maneuver. The ParkSense Active Park Assist
system will automatically search for a parking
space on the passenger’s side of the vehicle
if the turn signal is not activated.
• The driver needs to make sure that the se-
lected parking space for the maneuver re-
mains free and clear of any obstructions (e.g.
pedestrians, bicycles, etc.).
• The driver is responsible to ensure that the
selected parking space is suitable for the
maneuver and free/clear of anything that may
be overhanging or protruding into the parking
space (e.g., ladders, tailgates, etc. from sur-
rounding objects/vehicles).
• When seeking for a parking space, the driver
should drive as parallel or perpendicular (de-
pending on the type of maneuver) to other
vehicles as possible.
• The feature will only indicate the last detected
parking space (example: if passing multiple
available parking spaces, the system will only
indicate the last detected parking space for
the maneuver).
When an available parking space has been
found, and the vehicle is not in position, you will
be instructed to move forward to position the
vehicle for a perpendicular parking sequence.
Once the vehicle is in position, you will be
instructed to stop the vehicle’s movement and
remove your hands from the steering wheel.
Active ParkSense Complete — Check Parking
Position
Active ParkSense Searching Display
Space Found — Keep Moving Forward
189
To Next Page
Loading...
