Once the vehicle is at a standstill with your
hands removed from the steering wheel, you will
be instructed to place the gear selector into the
REVERSE position.
When the driver places the gear selector into the
REVERSE position, the system may instruct the
driver to wait for steering to complete.
The system will then instruct the driver to check
their surroundings and move backward.
NOTE:
• It is the driver’s responsibility to use the brake
and accelerator during the semi-automatic
parking maneuver.
• When the system instructs the driver to re-
move their hands from the steering wheel, the
driver should check their surroundings and
begin to back up slowly.
• The ParkSense Active ParkAssist system will
allow a maximum of six shifts between
DRIVE (automatic transmission) or forward
gear (manual transmission) and REVERSE.
If the maneuver cannot be completed within
six shifts, the system will cancel and the
instrument cluster display will instruct the
driver to complete the maneuver manually.
• The system will cancel the maneuver if the
vehicle speed exceeds 5 mph (7 km/h) during
active steering guidance into the parking
space. The system will provide a warning to
the driver at 3 mph (5 km/h) that tells them to
slow down. The driver is then responsible for
completing the maneuver if the system is
canceled.
• If the system is canceled during the maneu-
ver for any reason, the driver must take
control of the vehicle.
When the vehicle has reached the end of its
backward movement, the system will instruct
the driver to check their surroundings and stop
the vehicle’s movement.
Space Found — Stop And Remove Hands
From Wheel
Space Found — Shift To Reverse
Check Surroundings — Wait For Steering To
Complete
Check Surroundings — Move Backward
190
To Next Page
