NOTE:
It is the driver’s responsibility to use the brake
and stop the vehicle. The driver should check
their surroundings and be prepared to stop the
vehicle either when instructed to, or when driver
intervention is required.
Once the vehicle is in a standstill condition, the
driver will be instructed to place the gear selec-
tor into the DRIVE position.
When the driver places the gear selector into the
DRIVE position, the system may instruct the
driver to wait for steering to complete.
The system will then instruct the driver to check
their surroundings and move forward.
When the vehicle has reached the end of its
forward movement, the system will instruct the
driver to check their surroundings and stop the
vehicle’s movement.
NOTE:
It is the driver’s responsibility to use the brake
and stop the vehicle. The driver should check
their surroundings and be prepared to stop the
vehicle either when instructed to, or when driver
intervention is required.
Once the vehicle is in a standstill condition, the
driver will be instructed to place the gear selec-
tor into the REVERSE position.
Check Surroundings — STOP
Check Surroundings — Shift To Drive
Check Surroundings — Wait For Steering To
Complete
Check Surroundings — Move Forward
Check Surroundings — STOP
191
To Next Page
