3. Reinstall the visor mirror light cover making
sure that it is properly locked.
4. Finally lower the visor mirror cover to the
mirror.
Dome Light Glove Compartment
To replace the bulb proceed as follows:
1. Open the glove compartment.
2. Place your fingers inside the light assembly,
pull the bulb to replace it.
3. Insert the new bulb, making sure it is properly
locked.
Dome Light
To replace the bulbs proceed as follows:
1. Lower the handle in the direction shown;
remove the dome light.
2. Replace the bulb by removing it from the side
contacts.
3. Insert the new bulb, locking it between the
contacts.
4. Reinstall the dome light.
Interior Cargo Lights
To replace the bulbs proceed as follows:
1. Using thumb with slight pressure – push bulb
holder to the side.
2. Fully disengage the bulb holder from the
housing.
Bulb Removal/Installation
Grab Handle/Dome Light
Bulb
Bulb Holder
Bulb Holder
223
To Next Page
