Climate Controls Description
Icon Description
MAX A/C Button
Press and release the MAX A/C Button in the touchscreen to change the current setting to the coldest output of air.
Pressing the button again will cause the MAX A/C operation to exit.
A/C Button
Press and release to change the current setting, the indicator illuminates when A/C is ON.
Recirculation Button
Press and release this button on the touchscreen or push the button on the faceplate to change the system between re-
circulation mode and outside air mode.
NOTE:
•
Recirculation can be used when outside conditions, such as smoke, odors, dust or high humidity are present.
•
Recirculation can be used on all modes except Defrost. The A/C can be deselected manually without disturbing the mode
control selection.
•
Continuous use of Recirculation mode may make the air inside the cabin stuffy and window fogging may occur. Extended
use is not recommended.
AUTO Button
Automatically controls the interior cabin temperature by adjusting airflow distribution and amount. Toggling this function will
cause the system to switch between manual mode and automatic modes. Refer to “Automatic Operation” for more infor-
mation.
48
To Next Page
Loading...
