the left or right arrow button to cycle through
the Vehicle Info submenus and follow the
prompts on each screen as needed.
1. Tire Pressure
• If tire pressure is OK for all tires a vehicle
ICON is displayed with tire pressure values
in each corner of the ICON.
• If one or more tires have low pressure,
“Inflate Tire To XX” is displayed with the
vehicle ICON and the tire pressure values
in each corner of the ICON with the pres-
sure value of the low tire displayed in a
different color than the other tire pressure
value.
• If the Tire Pressure system requires ser-
vice, “Service Tire Pressure System” is
displayed.
• Tire PSI is an information only function and
cannot be reset.
• Refer to “Tire Pressure Monitoring System
(TPMS)” under “Safety” for further informa-
tion.
2. Coolant Temperature
Displays the actual coolant temperature.
3. Transmission Temperature — Automatic
Transmission Only
Displays the actual transmission temperature.
4. Oil Temperature
Displays the level of oil temperature.
5. Battery Voltage
Displays the actual battery voltage
6. Service
Displays the mileage and days since last ser-
vice.
Driver Assist
Push and release the up or down arrow button
until the Driver Assist menu title is displayed is
highlighted in the instrument cluster display.
Adaptive Cruise Control (ACC) Menu — If
Equipped
The instrument cluster display displays the cur-
rent ACC system settings. The information dis-
played depends on ACC system status. Push
the Adaptive Cruise Control (ACC) on/off button
(located on the steering wheel) until one of the
following displays in the instrument cluster dis-
play:
Adaptive Cruise Control Off
When ACC is deactivated, the display will read
“Adaptive Cruise Control Off.”
Adaptive Cruise Control Ready
When ACC is activated but the vehicle speed
setting has not been selected, the display will
read “Adaptive Cruise Control Ready.” Push and
release the SET + or the SET- button (located
on the steering wheel) and the following will
display in the instrument cluster display:
ACC SET
When ACC is set, the set speed will display in
the instrument cluster.
The ACC screen may display once again if any
ACC activity occurs, which may include any of
the following:
• Distance Setting Change
• System Cancel
• Driver Override
• System Off
• ACC Proximity Warning
• ACC Unavailable Warning
• The instrument cluster display will return to
the last display selected after five seconds of
no ACC display activity.
Refer to “Adaptive Cruise Control (ACC) — If
Equipped” in “Starting And Operating” for further
information.
LaneSense — If Equipped
The instrument cluster display displays the cur-
rent LaneSense system settings. The informa-
tion displayed depends on LaneSense system
status and the conditions that need to be met.
Refer to “LaneSense — If Equipped” in “Starting
And Operating” for further information.
74
To Next Page
Loading...
