2
The content of this supplement integrates
the Owner Handbook for the Plug-In Hybrid
and Full Electric versions.
For anything not included, refer to the
Owner Handbook.
CHARGING
CHARGING PORT ON THE CAR
1)
WARNING Use only the charging cable
supplied with your car or a replacement
cable recommended by FCA; refer to the
label on the control unit, which indicates
the electrical current strength (Ampere)
(A), fig.1, and the "Mode2 Cable Variants"
table in the "Power sources that can be
used" chapter.
1 J0A6175E
IMPORTANT
1) The charging current level (“Level 1”/
“Level 2”/ “Level 3”, etc.) can only be
varied from the Uconnect
TM
system display
in Jeep/FIAT/ABARTH cars or the Alfa
Connect system display in Alfa Romeo
cars (see the description in the “Settings”
paragraph of the Uconnect
TM
online
supplement for Jeep/FIAT/ABARTH cars
or Alfa Connect online supplement for Alfa
Romeo cars). The default charge level set
is "Level 3". For the list of cable types, refer
to the “Mode2 cable variant table”.
To Next Page
Loading...
Need help?
General
