5. Position the lap belt so that it is snug and lies low across
your hips, below your abdomen. To remove slack in the
lap belt portion, pull up on the shoulder belt. To loosen
the lap belt if it is too tight, pull on the lap belt. A snug
seat belt reduces the risk of sliding under the seat belt in
a collision.
6. Position the shoulder belt on your chest so that it is
comfortable and not resting on your neck. The retractor
will withdraw any slack in the seat belt.
7. To release the seat belt, push the red button on the
buckle.
8. To disengage the mini-latch plate from the mini-buckle,
insert the regular latch plate into the center red slot on
the mini-buckle.
WARNING!
• If the mini-latch plate and mini-buckle are not prop-
erly connected when the seat belt is used by an
occupant, the seat belt will not be able to provide
proper restraint and will increase the risk of injury in
a collision.
(Continued)
Inserting Latch Plate Into Buckle
Detaching Mini-Buckle With Seat Belt Tongue
5
SAFETY 177
To Next Page
Loading...
