the passive entry lock button located on the outside door
handle, to lock the vehicle doors and liftgate.
NOTE: DO NOT grab the door handle, when pushing the
door handle lock button. This could unlock the door(s).
NOTE:
• After pushing the door handle button, you must wait
two seconds before you can lock or unlock the doors,
using either Passive Entry door handle. This is done to
allow you to check if the vehicle is locked by pulling the
door handle without the vehicle reacting and unlocking.
• If Passive Entry is disabled using the Uconnect System,
the key protection described in ⬙Preventing Inadvertent
Locking of Passive Entry key fob in Vehicle⬙ remains
active/functional.
Push The Door Handle Button To Lock
DO NOT Grab The Door Handle When Locking
3
GETTING TO KNOW YOUR VEHICLE 37
To Next Page
Loading...
