106 GETTING TO KNOW YOUR VEHICLE
TONNEAU COVER REMOVAL
To remove the Tonneau Cover, proceed as follows:
1. Open the tailgate.
2. Fold the rear panel of the Tonneau Cover forward to
reveal the red release straps.
Release Strap Location
3. Pull one of the red release straps to release the
Tonneau Cover latch.
NOTE:
Pulling either strap will release the latches to roll the
Tonneau Cover up; there is no need to pull both at the
same time.
4. Roll the Tonneau Cover forward, starting with the
rear bar and continue to roll toward the front of the
truck bed.
Roll Tonneau Cover Forward
5. Using the stowage straps, secure the Tonneau Cover
in the rolled up position.
Secured Tonneau Cover
6. Using a #T50 Torx head driver, remove the two
fasteners securing the Tonneau Cover to the front of
the truck bed.
Fastener Locations
7. Utilizing two people, lift the Tonneau Cover up and
away from the truck bed.
NOTE:
Be sure the Tonneau Cover has been completely rolled up,
and straps are secure, before removing.
8. Store in a safe location.
23_JT_OM_EN_USC_t.book Page 106
To Next Page
Loading...
