A. CAT-BACK EXHAUST SYSTEM.
(1)
Helps increase horsepower
and torque gains and provides a deeper tone. Features T304
stainless steel construction (aircraft quality) with mandrel-
bent tubing, stainless band clamps, muffler and bright
polished tips.
[ 82215642AB ]
B. 2-INCH LIFT KIT WITH FOX® SHOCKS.
(1)(2)
Kit is completely
developed by Jeep
®
Performance Parts engineers to be the
best no-compromise Lift Kit available for your Jeep Gladiator.
Includes 2.5-inch-diameter aluminum body monotube
FOX® Shocks for cooler operation, increased articulation and
tire-to-ground contact. The longer front control arms optimize
caster suspension tuning for on-road driving dynamics without
compromising off-road capability. The parts are easy to install,
as no driveshaft or brake-line replacements are required.
Kit comes in a reusable Jeep Brand wooden crate.
[ 77072468AC – Gas ] [ 77072469AC – Diesel ]
C. COLD AIR INTAKE SYSTEM.
(1)
Features Jeep Performance
Parts logo and reusable Black and Silver drop-in filter. Draws
fresh air from outside vehicle into hood cut-out to increase
engine performance. Available for 3.6L engines only and
includes bezel to finish cut-out.
[ 77072433AC ]
D. COLD AIR INDUCTION FILTER. Replacement High-Flow Air
Filter designed to fit the Cold Air Intake System (shown
above). Also a replacement for the production air filter.
Washable.
[ P5160245AA ]
Not all part numbers shown. See retailer for additional part numbers by vehicle application.
(1)
Jeep Performance Parts, including Lift Kits, are designated as “Off-Road Only” parts and have
not been evaluated or tested for crashworthiness or compliance with safety standards. Jeep
Performance Parts noted as “Off-Road Only” are aftermarket only, may not be installed by a
Chrysler, Dodge, Jeep, Ram or FIAT® retailer on a new vehicle, and may not be sold or financed in
conjunction with the sale of a new vehicle. FCA Canada Inc. does not authorize the installation of any
part noted as “Off-Road Only” on any vehicle prior to its first retail sale.
(2)
It works with
Electronic Stability Control, although unique alignment specifications are required.
MADE TO
ASSURE AND
ENDURE
A
C
BD
To Next Page
Loading...
