9
Change parameters page 1/2
Orange stripe = not paired, green stripe = paired
Paired = loads parameters from Leviathan - V2.
Change parameter -> shows „writting...„ in the
green stripe. Text dissapear -> parameter is saved
Fire modes with Selector on safe/semi/auto:
- SAFE: no responding on the trigger pull.
- Semi: it res single shot per trigger pull.
- Semi/BurstX: short trigger pull res single shot,
long trigger pull res burst.
- Double trigger: re semi when trigger is pulled
and semi again when it is released in less than 3s.
- BurstX: gun shoot burst per trigger pull.
- BurstX+BurstY: short trigger pull re burstX,
long trigger pull re burstX plus burstY bullets.
- BurstX/Full: short trigger press res burstX, long
trigger press makes auto re.
- Full: gun makes auto re until trigger is released.
Burst functions:
It enables you to shoot a set number of BBs on one
trigger pull. It will always complete the burst. Eve-
ry selector has its own burst settings.
Rate of re:
It is useful for solving problems with too high gun
RoF. This function makes breaks between shots to
reduce RoF. It gives you fast trigger response even
with very low rate of re, just like in a real gun.
To Next Page
Loading...