Installation Instructions for 81165
Creeper & Z-Seat
SAFETY AND GENERAL INFORMATION
For your safety, read, understand, and follow the information provided with and on this folding creeper. The owner and
operator shall have an understanding of this product and safe operating procedures before attempting to use. The
owner and operator shall be aware that use of this product may require special skills and knowledge. Instructions and
safety information shall be conveyed in the operator’s native language before use of this product is authorized. Make
certain that the operator thoroughly understands the inherent dangers associated with the use and misuse of the
product. If any doubt exists as to the safe and proper use of this product, remove from service immediately.
Inspect before each use. Do not use if there are broken, bent, cracked or damaged parts (including labels). Any
folding creeper that appears damaged in any way, or operates abnormally shall be removed from service immediately.
If the folding creeper has been subjected to a shock load (a load dropped suddenly, unexpectedly upon it), immediately
discontinue use. It is recommended that an annual inspection be done by qualified personnel.
PRODUCT DESCRIPTION
This device is designed to be folded in a ‘Z’ shape for use as a mechanics seat or unfolded for use as a mechanics
creeper. It is intended to be used to support and move, along a smooth and level surface, rated capacity loads
consisting of a single person weighing no more than 300 lbs. for the purpose of performing automotive maintenance or
service. This device is not intended, designed or engineered to be used for any other purpose. Rated Capacity: One
person (includes any tools, equipment, personal items) weighing 300lbs. or less.
WARNING: Do not use this device for any purpose other than that for which it is expressly intended.
To Next Page
General