Jenlis Weed Razer Express

Need help?

Do you have a question about the Jenlis Weed Razer Express and is the answer not in the manual?

Summary

Important Information

General Warnings and Safety Precautions

Covers warnings about injury, sharp blades, and safety first instructions.

Manufacturer Liability Disclaimer

States Jenlis, Inc. is not responsible for damage or injury due to misuse.

Assembly & Instructions

Step 1: Support Bracket Assembly

Instructions for assembling support brackets with bolts and spacers.

Step 2: Blade Attachment

Instructions for attaching blades to the support bracket with washers and nuts.

Step 3: Handle and Deflector Assembly

Instructions for attaching the weed deflector and angled handle.

Assembly & Instructions (cont.)

Step 4: Securing Assembly

Instructions for securing the assembly using bolts, washers, and nuts.

Step 5: Handle Connector Assembly

Instructions for connecting the handle sections using spring-loaded buttons.

Operating Instructions

Throwing and Sinking the Weed Razer

Guides on how to deploy the Weed Razer into the water for operation.

Pulling Technique for Weed Removal

Describes the jerking motion for effectively clearing weeds.

Blade Sharpening Instructions

Safety Precautions for Sharpening

Emphasizes wearing cut-resistant gloves during sharpening.

Sharpening Procedure Steps

Details the steps for sharpening the Weed Razer blades correctly.

Safety Instructions

General Safety Guidelines

Lists critical safety rules including glove use, operation, and proximity warnings.

Consequences of Non-Compliance

Highlights severe outcomes like lacerations and death from failing to follow precautions.

Warranty Information

1-Year Manufacturers Warranty

Details the warranty coverage for defects in workmanship and materials.

Warranty Limitations

Outlines conditions that void the warranty, such as misuse or accidents.

The WeedRazer Express (Item 580125) is a specialized aquatic vegetation cutting tool designed for efficient removal of submerged, partially emergent, or emergent weeds from underwater environments. This manual provides comprehensive instructions for assembly, operation, safety, and maintenance, ensuring proper and safe use of the device.

Function Description:

The primary function of the WeedRazer Express is to cut and clear aquatic vegetation. It is specifically engineered for use in water, allowing users to effectively manage weeds in lakes, ponds, and other aquatic settings. The tool operates by being thrown into the water and then pulled back, utilizing its sharp blades to sever vegetation at its base.

Important Technical Specifications:

The WeedRazer Express consists of several key components that contribute to its functionality and durability. The main cutting mechanism involves two razor-sharp blades (C) attached to a support bracket (D). These blades are designed for maximum cutting efficiency. The tool features a two-part handle system, comprising a main handle (A) and an angled handle (B), which connect via a handle connector (E). This modular design allows for easy assembly and potentially adjustable length, though specific length adjustments are not detailed. A weed deflector (F) is integrated into the design to help guide cut vegetation and protect the handle connection. For operation, a 25-foot rope (K) is included, enabling users to cast the WeedRazer and retrieve it from a distance. The assembly requires specific fasteners: 1.5" bolts & T-nuts (H), 1.5" bolts, nuts, washers (I), and 1.2" bolts, nuts, washers (J), along with nylon spacers (G) for proper blade alignment and spacing. A blade sharpener (L) is also provided, highlighting the importance of maintaining sharp blades for optimal performance.

Usage Features:

The WeedRazer Express is designed for manual operation, emphasizing user control and safety.

Targeted Vegetation Removal: It is specifically designed for cutting submerged, partially emergent, or emergent aquatic vegetation. This makes it suitable for a wide range of weed management scenarios in aquatic environments.
Manual Operation: The tool is operated by hand, requiring users to throw it out into the water and then pull it back using the attached rope. This method allows for precise targeting of weeded areas.
Casting and Retrieval: Users are instructed to throw the WeedRazer out and over the area to be cleared. If operating from a dock, the rope can be tied to a post to prevent over-throwing. After casting, the tool is allowed to sink to the desired depth.
Cutting Motion: The cutting action is achieved by pulling the WeedRazer back using "short, hard, jerking motions." This technique is designed to maximize the cutting effectiveness of the blades.
Repeatability: Users are advised to repeat the casting and retrieval process as many times as needed to thoroughly clear the desired area of weeds.
Safety Precautions during Use:
- No Mechanical Towing: The WeedRazer is strictly for hand operation and must not be pulled behind a boat or any other machine-driven equipment. Doing so will void the warranty and can damage the tool.
- Clear Operating Area: It is crucial to ensure no humans or animals are within 100 feet from the launch point when using the WeedRazer.
- Avoid Underwater Structures: Users should avoid areas known to have underwater structures to prevent damage to the tool and potential entanglement.
- Electrical Safety: The tool should not be placed or used near electrical wires or cords.

Maintenance Features:

Proper maintenance is essential for extending the lifespan and ensuring the continued effectiveness of the WeedRazer Express.

Blade Sharpening: The manual provides detailed instructions for sharpening the blades using the included blade sharpener (L).
- Preparation: Always wear cut-resistant gloves when handling the WeedRazer, especially during sharpening. The tool should be stood upright, gripping the handle, or rested against a wall/building. The user should kneel or sit in a stable position, never standing or leaning over the cutting edge during sharpening.
- Sharpening Technique: Hold the sharpener with the thumb resting on its flared ridge. Run the sharpener down the cutting blade edge in four to six strokes, applying less pressure as the edge becomes sharper. Users should press one edge of the sharpener's steel on the blade edge they wish to sharpen, then switch to the other side of the sharpener's steel for the other side of the blade.
- Opposite Side Sharpening: To sharpen the opposite side of the blade, either switch hands or turn the WeedRazer around to position the other edge for sharpening.
Blade Cover Usage: The blade covers are critical for safety. They should be on during assembly and whenever the tool is not in use. This prevents accidental lacerations, dismemberment, or death due to the razor-sharp blades.
Regular Inspections: Before each use, users should check all bolts, connections, and the rope to ensure they are secure and in good working condition.
Storage: When not in use, the WeedRazer should be stored in a safe location, out of the reach of children.
Replacement Parts: Replacement parts are available online at www.weedrazers.com, ensuring that worn or damaged components can be easily replaced to maintain the tool's functionality.

Safety Instructions (General):

The manual emphasizes several critical safety instructions to prevent injury, equipment damage, or failure.

Read Manual Thoroughly: Users must read the instructions thoroughly before use, as failure to comply can lead to severe consequences.
Razor Sharp Blades: The blades are extremely sharp, and covers must be used when not in operation or during assembly.
Keep Out of Reach of Children: The tool should be kept away from children, and children should not be in the immediate area during use.
Wear Cut-Resistant Gloves: Always wear cut-resistant gloves when handling the WeedRazer, especially when removing or attaching blade covers.
No Bare Hand Contact: Never touch the sharp edges of the blades with bare hands at any time.
Manufacturer Responsibility: Jenlis, Inc. is not responsible for equipment damage, failure, losses, injury, or death resulting from failure to follow safety precautions, misuse, or abuse of equipment.

Warranty Information:

The WeedRazer Express comes with a 1-Year Manufacturer's Warranty from Jenlis, Inc., covering defects in workmanship and materials under normal, non-commercial use. The warranty period begins from the original invoice date. The warranty explicitly excludes damage resulting from commercial use, misuse, abuse, negligence, and/or accidents. Jenlis, Inc. reserves the right to repair or refurbish the product without charge during the warranty period. All warranty claims require pre-approval and must be sent to Jenlis at the customer's expense, with return shipping pre-paid. An RMA number is required for all returns, which can be obtained from www.weedrazer.com/warranty. Returns without an RMA will be refused.