To Next PageTo Next Page
Need help?Do you have a question about the Jenn-Air JDR8895 Series and is the answer not in the manual?
General safety guidelines, lifting, placement, and anti-tip device installation.
Guidance on connecting the range to the electrical power supply and ensuring adequacy.
Steps for connecting the gas supply, leak detection, and pressure checks.
Procedures for removing the range for service and obtaining replacement parts.
Specifies required clearances between the range, cabinets, and walls for safe installation.
Visual representation of the range's physical dimensions for installation planning.
Guide to determining the correct electrical hookup (3-wire or 4-wire) for the range.
Detailed steps for making a 3-wire electrical connection to the range.
Detailed steps for making a 4-wire electrical connection to the range.
Further steps for 4-wire connections and instructions for bare wire services.
Procedures for connecting the gas line, regulator, and shut-off valve.
Instructions for installing strain relief devices for electrical or conduit connections.
Steps for locating and mounting the anti-tip bracket for wood or concrete surfaces.
Final placement, securing the range, and adjusting leveling legs.
Final steps to turn on the electrical supply and complete the installation.
Steps for preparing and installing the conduit plate for electrical connections.
General